EI-2001T series Intelligent programmable salt spray tester (touch screen interface) is used to test the corrosive resistance of products whose the surface was treated with paint, electroplating, inorganic and organic film, anode handling, anti-rust oil, etc.
Specification
| Model | EI-2001TC | EI-2001TB | EI-2001TA |
| Inner size(mm) | 600x450x400 | 900x600x500 | 1200x800x500 |
| Outer size(mm) | 1070x600x1180 | 1410x880x1280 | 1900x1100x1400 |
| Testing room temperature | Salt test (NSS ACSS)35℃±1℃/Corrosion Test (CASS)50℃±1℃ | ||
| Pressure barrel temperature | Salt test (NSS ACSS)47℃±1℃/Corrosion Test (CASS)63℃±1℃ | ||
| Brine temperature | 35℃ ±1℃50℃ ±1℃ | ||
| Testing room Capacity | 108L | 270L | 480L |
| Brine tank capacity | 15L | 25L | 40L |
| Salt concentration | The concentration of sodium chloride 5% or the 5% concentration of sodium chloride add 0.26g per liter of copper chloride (CuCl2 2H2O) | ||
| Air pressure | 1.00±0.01kgf/cm2 | ||
| Spray volume | 1.0~2.0ml/80cm2/h (working at least 16 hours, and then take the average) | ||
| Testing room relative humidity | 85% above | ||
| PH | 6.5~7.2 3.0~3.2 | ||
| Spray form | Programmable spray (Including continuous and intermittent spray) | ||
| Power | AC220V, 10A | AC220V, 15A | AC220V, 20A |
According to CNS JIS ASTM GB2423.19 specifications
Salt spray test: NSS, ACS
1. testing room : 35 ℃ ± 1 ℃
2 saturated air barrels : 47 ℃ ± 1 ℃
Anti-corrosion test: CASS (copper acetate)
1.testing room: 50 ℃ ± 1 ℃
2 saturated air barrels: 63 ℃ ± 1 ℃
Standard
ASTM B117-97 salt spray test, JIS H8502 salt spray test, IEC68-2-11 salt spray test, IEC68-2-52 1996 salt spray test
CNS.4158 salt spray test, CNS.4159 CASS Accelerated acetic acid copper salt spray test
Standard Accessories
| Reagent sodium chloride (NACL) 500 g | 2 bottles |
| Calibration cup | 1 pcs |
| Instruction manual | 1 pcs |
| PH test paper | 1 pcs |
PDF Data Sheet