EI-2012A Hot and Cold Impact Testing Chamber (Two boxes)
Description
EI-2012A Hot and cold impact testing Chamber (Two boxes) used to test the change of material under extremely high and low temperature environment that continue alternation in the shortest time.
Applicable for Aviation, military, ships, electrical, electronics, instruments and meters; medical equipment; civilian nuclear energy; colleges and universities; research laboratories; commodity inspection, arbitration, technical supervision departments; building materials ceramic; petroleum and chemical products, machine and spare parts.
Specification
| Model | EI-2012A Hot and cold impact testing machine (Two boxes) |
| Temperature range | A.high-temperature：+60℃～+150℃ |
| B.low-temperature：-10℃～-40℃； | |
| Control temperature | ±2℃； |
| resolution | 0.01℃； |
| Heating time at high-temperature region | RT～＋150℃ about 35min（RT is from ＋5～＋30℃）. |
| Cooling time at low-temperature region | RT～-40℃ about 50min（RT is from ＋5～＋30℃） |
| Moving time and temperature recover time | A. testing bastet moving from high-temperature to low-temperature spend 10sec |
|
B.after exchanging the temperature,the tempreature recovery time: 3min～5min (Stabilization time ≥ 30min) |
|
| Device noise | Below 75dB. |
| Weight | 10Kg |
| Testing region(hot and cold) | 50cm（W）*50cm（H）*50cm（D）； |
| Outside size | 140cm（W）*180cm（H）*142cm（D） |
| Testing basket size | 30cm（W）*40cm（H）*30cm（D） |
| Inside material | SUS#304 Cold-Heat-resistant stainless steel |
| Outside material |
SUS#304 Cold-Heat-resistant stainless steel |
| Insolution material | High-density glass wool and high strength PU foam insulation |
| Anti-sweat structure | Insulation layer and door micro-thermal anti-sweat |
| Expansion | Heat reach 300℃，cold reach -100 degree |